|
|
|
Online PDF files are not available for the following components. If you would like a paper copy mailed to you, please fill in the request form below.
|
Trabtech Surge Protection
|
||
 |
Lightning Current Arresters
|
|
| The first stage of an effective three-stage concept for the protection of the power supply is the lightning current arrester, FLASHTRAB. It is used to limit the surge voltages from lightning strikes and to arrest lightning surge currents in the central power supply. | ||
 |
Surge Voltage Arresters
|
|
| The surge protection device, VALVETRAB is the second stage in the concept from PHOENIX CONTACT for surge voltage protection for the power supply. Thus, switching surge voltages in the power supply network or the residual voltage left in the lightning current arrester during an arresting process are limited to a value lower than 1.5 kV. | ||
 |
Equipment Protection
|
|
| Equipment protection as the third protection stage is a sensible continuation of the effective concept of protection for the power supply. The arresters are installed directly in front of the device to be protected and are available in various designs, e.g. as fitted box module, ground contact socket, socket adapter, or as a rail-mountable module. | ||
 |
Surge Voltage Protection for MCR Technology
|
|
| For the field of measurement and control technology PHOENIX CONTACT provides surge voltage protection devices with protective circuits for analog or binary signal interfaces. Scaled according to the voltage levels, the circuits are designed, for example, for two, three and four conductor measurement circuits. A special protection device is available for the protection of intrinsically safe circuits. | ||
 |
Data Interface Protection
|
|
| With the use of surge voltage protection devices corresponding to the electrical parameters and mechanical conditions for connection of the data interface, the availablility of data processing equipment is considerably increased and data loss avoided. | ||
 |
Equipotential Bonding and Housings
|
|
| PHOENIX CONTACT provides equipotential busbars and grounding electrodes to consistently realise equipotential bonding and connect it to the grounding system. The robust TRABTECH housings in IP 65 are the pratical solution for the separate installation of surge voltage arresters. Thus the surge voltage protection can even be installed in a harsh environment. | ||
 |
Shield Terminal Block
|
|
| When designing low-interference systems, only shielding type signal leads are laid. With the help of SK shield terminal block, cable shield can be practically connected with great ease at any point in the switch cabinet. | ||
 |
Marking
|
|
| PHOENIX CONTACT has a wide choice of different marking materials in its product range for professional and clear labelling of the protection devices - from equipment marking systems to the CMS Computer Marking System, consisting of software, plotter, milling and engraving system. | ||